ATMOS air pump by Scanstrut

Ready to inflate?

At the push of a button, ATMOS is ready to inflate paddleboards and towable toys in quick time. It is a case of simply setting the target pressure and then letting the system get on with the job in hand. Scanstrut’s durable outdoor DNA, which we have seen across their range of products, means this is engineered to survive in a harsh marine environment.

This paddleboard pump and towable toys pump is a no-nonsense pump, taking away the chore of getting your inflatables in shape.

Next generation air pump technology

Featuring ‘next-gen air pump technology’ providing fast and effortless inflation (and deflation) for your on-water toys, this unit is quick to get things sorted. Compact and shallow, ATMOS fits into almost any panel on board, such as seating, consoles or near the swim platform.

The unit is compact and shallow.

Innovation

It has an ‘innovative two-stage pump’. The first stage features an efficient fan motor, followed by a robust piston pump, both designed specifically for hard and continual use. ATMOS combines both of these pumps into one, which automatically switches at 1.1PSI from the high-volume low-pressure (HVLP) to the high-pressure low-volume (HPLV) pump.

Stage 1: High-volume, low-pressure (HVLP)

Designed to move large volumes of air with minimal pressure. This is typically used for inflating bigger objects like large tubes and bathing platforms as it can quickly inflate the object to the desired pressure.

Stage 2: High-pressure, low-volume (HPLV)

Designed to generate a high level of pressure with a low volume of air. Perfect for inflating smaller toys like SUPs, inflatable kayaks and tubes that require a higher level of pressure.

In real terms, this means that inflating a 10.6ft SUP to 20PSI will take between six and eight minutes, while deflating needs just one minute. For an average towable toy, inflating to 1.5PSI takes three minutes, and deflating requires only one minute, while a swim 4m x 2m platform needs 16 minutes to get to 5PSI – all fast times by any standard.

There is a wide range of air hose connectors.

The maximum recommended continual runtime for the air station is 25 minutes. The high-brightness LCD screen keeps you informed in all conditions, while the wide viewing angle of the display means you always have a good view, even on the brightest days. The display also features a Live Voltage readout, so you can keep track of your boat’s battery health.

All controls are soft-touch TPE buttons. Made for a marine environment, these buttons are designed to withstand exposure to salt water and UV rays, and the non-slip texture provides a tactile surface, even with wet hands. A built-in foam gasket creates an IPX6 seal to keep water out of the installation cavity. The waterproof door design enables convenient access to the inflate/deflate valves.

ATMOS has been built to be easily integrated thanks to a compact and shallow design. Fitment requires 10 self-tapping screws and the foam gasket. The minimum cavity depth required is 110mm, and it can be installed at an angle ranging from +10º to -30º from vertical. The power cable length is 500mm using a wire gauge of 2x 1.5mm2 16 AWG. It is designed with several integrated protection features to guarantee safe and dependable use: reverse-polarity, short-circuit, under-voltage, overload and over-temperature conditions. ATMOS comes with a 2.5m air hose and a variety of valve adapters to ensure compatibility with different types of inflatables. These include the Boston valve, C7 valve, H3/HR valve, pinch valves and 805 valve. The warranty is two years.

Price: From £500 (inc. VAT)

Contact: www.scanstrut.com